Switch For Bulk Solids

Dynatrol® CL-10DJ Level Switch for Bulk Solids

The Dynatrol® CL-10DJ Vibrating Level Switch is designed for high-, intermediate- or low-point level detection of bulk solids. The CL-10DJ is typically used with bulk solids in the density range of 15-60 lbs/ft3.


Dynatrol® CL-10DJ-7 Level Switch for Bulk Solids

The Dynatrol® CL-10DJ-7 Vibrating Level Switch is designed for high-, intermediate- or low-point level detection of bulk solids. The CL-10DJ-7 is typically used with bulk solids with a density greater than 60 lbs/ft3.


Dynatrol® CL-10GJ Level Switch for Light Bulk Solids

The Dynatrol® CL-10GJ Level Detector operates with consistent results on problem applications with a tendency to bridge or pack. It handles difficult products such as flour, cocoa, sugar, pharmaceutical powders, powdered lime and additional bulk solid materials for high-, intermediate- or low-point level detection. The CL-10GJ is typically used with bulk solids in the density range of 10-15 lbs/ft3.


Dynatrol® CL-10GS Level Switch for Low Density Bulk Solids

The Dynatrol® GS Level Sensor Detector is designed for application to high, intermediate, or low point level detection of bulk solids. The GS Level Detector successfully handles lightweight media applications that are difficult to measure or detect like fine low density powders, flock, fluff or fumed silica, etc.The CL-10GS is typically used with bulk solids in the density range of 5-10 lbs/ft3.


Dynatrol® CL-10GSS Level Switch for Extremely Lightweight Bulk Solids

The Dynatrol ® CL-10GSS Level Detector may be used for high-, intermediate-, or low-point level detection of bulk solids. It is constructed to handle extremely light weight applications that are difficult to measure like glass fibers, glass wool, paper dust, polyester powders and polymer powders. The CL-10GSS is typically used with bulk solids in the density range of less than 5 lbs/ft3.


Suspended Level Switch

Dynatrol® Sealed & Suspended Level Switch

The Sealed and Suspended Dynatrol® Detector is designed for high point level detection of bulk solids. For problem applications, such as those associated with angle-of-repose, this configuration provides reliable operation in hard to reach locations.


Control Unit

EC-501A & EC-501A(G) Control Unit

The Dynatrol® EC-501A and EC-501A(G) Control Unit combines with the DJ and G Series Dynatrol® Level Detectors, including Sealed and Suspended units. Within the Control Units, a SPDT relay is operated from the On/Off signal of the Dynatrol® Level Detector. Simply actuate process control equipment, level alarms or indicator lights from the contacts of this control unit.

Scroll to Top