Applications

Power Plant

Dynatrol® instruments provide Bulk Solids Level Measurement of fly ash applications, Density Measurement of water treatment chemicals, various liquors and lime slurries and Viscosity Measurement of fuel oil and waste oil.

Bulk Solids Level Detection

Dynatrol® CL-10DJ series level switches are used for fly ash applications in power generation plants and for fly ash collection. These level indicators are also used in applications where fly ash is used as a filler. Our CL-10DJ level probes are made from high strength stainless steel. For more abrasive or corrosive service, our level switches can be made from other materials. These level switch probes are well suited for the high temperature and harsh environments that are always a part of fly ash applications.

Density Measurement

The Dynatrol® CL-10HY Density Cell and Series 2000 Digital Density Converter can be used to measure density, specific gravity or percent solids of water treatment chemicals such as caustic soda or sulphuric acid. Our equipment is also used to measure black liquor, green liquor and lime slurries, etc. at process conditions.

Our application software is written to use temperature and density information that comes from the CL-10HY cell to calculate various units at process conditions

Viscosity Applications

The Dynatrol® CL10-DV series Viscosity Meter and Series 3000 Viscosity Digital Converter are used to measure the viscosity of fuel oil in fuel oil to burner applications. Thus, helping to increase combustion efficiency and decrease particulate emissions. Dynatrol® Viscosity Systems are also used in waste oil incineration and waste oil pumping applications.

Have Questions? We Have Answers!

* required field

Liquids and Slurries

A unique vibrating principle permits design and operation features not available with other types of liquid level detectors. This detector may be mounted on a vessel or in piping, and easily detects the level of a wide range of liquids and slurries. Many excellent applications are found in the chemical, food and petrochemical industries.

The Dynatrol® Type CL-10GH Liquid Level Detector is a dynamic type level switch for application to either high or low point level detection of liquids and slurries. A unique vibrating principle permits design and operation features not available with other types of liquid level detectors. This detector may be mounted on a vessel or in piping, and easily detects the level of a wide range of liquids and slurries. Many excellent applications are found in the chemical, food and petrochemical industries.

  • Acrylic polymer
  • Adhesives
  • Aluminum distearate
  • Asphalt
  • Asphalt oil, heat transfer fluid
  • Benzene .87 sg
  • Brine
  • Butadiene
  • Caprolactam
  • Carbon/water slurry
  • Catalyst slurry, ester
  • Caustic resins
  • Ceramic fiber slurry, gas logs
  • Chemical slurry
  • Chopped green chiles
  • Coffee slurry
  • Condensate
  • Coolant
  • Cooling tower
  • Crude oil, salt water
  • Diesel
  • Diesel, gasoline, MTBE
  • Distillate oil
  • Edible oil, or water
  • Fatty acids, fluids
  • Fatty alcohol, water
  • Fish protein slurry
  • Fuel oil
  • Gas cooler
  • Glue, water
  • Glycol, polymer processing
  • Ground water
  • Hazardous waste
  • Heavy oil
  • Hexane, gasoline
  • HTSA
  • Hydraulic fluids
  • Hydraulic oil
  • Hydrogen recycle
  • Fatty alcohol/water
  • Ice cream mix
  • Invert sugar
  • Jet fuel
  • Lecithin
  • Lime slurry
  • Liquid aspirin
  • Liquid feed (like chocolate)
  • Liquid fertilizer
  • Liquid hydrocarbons
  • Liquid polyester resin
  • Liquid tallow
  • Light hydrocarbons
  • Lube oil, hydrogen
  • Magnetite iron oxide slurry, foam
  • Malic acid
  • Meat digest slurry
  • Melted HTSA
  • Methyl esters
  • Methyl mercaptan
  • Oil
  • Oil, water
  • Paint
  • Paper
  • Petroleum #6
  • Phenolic resin
  • Polyester resin
  • Polyethylene glycol
  • Polymer
  • Process water
  • Recycle mineral spirits, thinner
  • Resin tank
  • Sealant
  • Soap
  • Soybean oil
  • Suet for wild bird feed
  • Sugar liquor
  • Sulfolene
  • Sulfuric
  • Triethyl phosphate/phosphoric acid
  • Vegetable oil
  • Waste oil, oil sludge
  • Wastewater
  • Wax, water

LOW DENSITY APPLICATIONS

  • Butane
  • Low gravity oils
  • Liquid ethane
  • Propane (.53)

Have Questions? We Have Answers!

* required field

Textiles

Our Density Measurement Systems are used to measure various types of media in the textile industry.

Density Measurement

The Dynatrol® CL10-HY Density Cell and Series 2000 Density Digital Converter can be used to measure the density, specific gravity, Baumé, or percent concentration at process conditions of caustic soda concentration and other textile chemicals. Applications may include:

  • Bleaches
  • Rinses
  • Sodium hypochlorite
  • Degree twaddle – textile hydrometers
  • and more...

Have Questions? We Have Answers!

* required field

Sodium Hydroxide – Caustic Soda

The CL10-HY Density Cell in conjunction with the Series 2000 Density Digital Converter can measure the temperature and density of a caustic soda (sodium hydroxide) process stream. The Series 2000 then processes this information.

Once the information is processed the density is calculated at a reference temperature. The specific gravity, baumé and percent concentration are then calculated from the reference temperature and the density at the reference temperature and this information is made available to the operator or process engineer.

The standard Series 2000 has a analog output corresponding to either of these process variables. Optionally, it can be programmed to have two analog outputs that can be calibrated for any two process variables (Temperature, Baume, Specific Gravity, Density, Percent Concentration, °Twaddle).

Have Questions? We Have Answers!

* required field

Boron (Nuclear)

Dynatrol® Density Systems are used to measure the concentration of Boron in nuclear power plants, as well as nuclear fuel manufacturing plants. Dynatrol® Systems have been used successfully in nuclear industries throughout the United States and are field proven.

The Dynatrol® CL-10HY Density Cell and Series 2000 Digital Density Converter are used to measure the concentration of Boron in nuclear power plants and nuclear fuel manufacturing plants.

The Dynatrol® Density System has two 4 to 20 milliamp outputs. The first output can be configured to reflect any of the measurement units (density, specific gravity, percent concentration, etc.), while the second output carries product temperature information. The software provided with the Series 2000 Digital Converter calculates the specific gravity, percent concentration, etc. using the density and temperature information generated by the CL-10HY Density Cell

Have Questions? We Have Answers!

* required field